Foil knowledge
Foil angles and shims explained
Shims confuse a lot of riders, and most never need one. It helps to start with how a foil is set up from the factory.
The stock setup
Most Axis front wings sit about 1 degree upwards from the fuselage, and most rear wings about 1.5 degrees downwards. That gives a difference of 2.5 degrees, which Axis calls by far the most important number.
More angle up means more lift and more drag. Less angle means less lift and less drag.
Positive and negative shims
A shim changes the difference between the two wings.
- Positive: the difference grows, for example to 3.5 degrees. This gives heavier riders more front foot pressure.
- Negative: the difference shrinks, for example to 1.5 degrees. This reduces front foot pressure for lighter riders and is faster.
Do you need one?
Most riders of around 85 kg in normal conditions do not need or benefit from shimming the rear wing. The foil should ride fine straight out of the box.
Questions
Do I need a shim on my foil?
Most riders around 85 kg in normal conditions do not need one.
What does a positive shim do?
It increases the difference between front and rear wing, giving heavier riders more front foot pressure.
What does a negative shim do?
It reduces front foot pressure for lighter riders and is faster.
Keep reading
The basics of foil design
Span, chord, thickness, foil section, camber, area and aspect ratio explained, so you can read a foil specification with confidence.
Axis rear wings: Progressive, Skinny and Link Skinny
How the Axis rear wing ranges differ, which front wings they pair with, and how the rear wing balances your foil.
Axis fuselages: Advance+ or Advance 20?
How the Axis Black Advance+ and Advance 20 fuselages differ, and which one suits your riding.
